4 keys to anticipate the winter season
Posted: Sun Dec 15, 2024 7:53 am
With the arrival of October, we begin to say goodbye to the heat and slowly prepare for the colder months to come… It's the ideal time to start preparing for the winter season! But what should you take into account for the proper functioning of the heating? Here are four key points:
1- Check and clean your boiler.
After a long period of non-use, it is necessary to carry out a check and cleaning of the boiler to ensure the proper functioning of the device, its efficiency and safety.
To tune up your boiler, you must general manager email lists follow four steps:
1- Check that the boiler is connected.
2- Set the boiler selector to heating/winter mode .
3- Check that the pressure is between 1 and 1.5 bars .
4- If it is below 1, activate the filling valve. Once the correct pressure has been reached, close the valve.
2- Check the heating circuit
Just as it is necessary to check the mechanism that is responsible for generating heat, it is also important to ensure that the circuit that will distribute it is in good condition.
A system in poor condition can have serious consequences, such as high energy consumption, poisoning or leaks. Therefore, it is necessary to monitor the correct operation of the keys and valves of the radiators, to detect possible leaks or noises that they may cause.
3- Take advantage of subsidies for changing boilers
The autonomous communities launch a series of aids aimed at all those who wish to replace their electric or fuel boiler with a condensing one. These aids are annual, but they do not have a fixed periodicity, so they are concluded as the funds allocated are exhausted.
However, in the case of already having a condensing boiler, you can opt for the renewal plan if you replace it with another condensing boiler that uses a more efficient fuel, such as changing from diesel to natural gas.
1- Check and clean your boiler.
After a long period of non-use, it is necessary to carry out a check and cleaning of the boiler to ensure the proper functioning of the device, its efficiency and safety.
To tune up your boiler, you must general manager email lists follow four steps:
1- Check that the boiler is connected.
2- Set the boiler selector to heating/winter mode .
3- Check that the pressure is between 1 and 1.5 bars .
4- If it is below 1, activate the filling valve. Once the correct pressure has been reached, close the valve.
2- Check the heating circuit
Just as it is necessary to check the mechanism that is responsible for generating heat, it is also important to ensure that the circuit that will distribute it is in good condition.
A system in poor condition can have serious consequences, such as high energy consumption, poisoning or leaks. Therefore, it is necessary to monitor the correct operation of the keys and valves of the radiators, to detect possible leaks or noises that they may cause.
3- Take advantage of subsidies for changing boilers
The autonomous communities launch a series of aids aimed at all those who wish to replace their electric or fuel boiler with a condensing one. These aids are annual, but they do not have a fixed periodicity, so they are concluded as the funds allocated are exhausted.
However, in the case of already having a condensing boiler, you can opt for the renewal plan if you replace it with another condensing boiler that uses a more efficient fuel, such as changing from diesel to natural gas.